SMA SUNNY CENTRAL CP XT Series - Mounting the Silencing Baffle

6 Mounting
SMA Solar Technology AG
Installation ManualSCCPXT-SCS_NR-IA-en-1220
6.9 Mounting the Silencing Baffle
With the order option "Noise reduction", a silencing baffle is delivered with the inverter. The silencing baffle must be
mounted on the rear panel of the inverter cabinet. When mounting, use the allround paste from the scope of delivery
for the bolted connections.
Mounting the rear panel of the silencing baffle
Required mounting material:
☐ 2 cylindrical screws
☐ 2 contact washers
Procedure:
1. Remove all screws from the threads for attaching the silencing baffle.
2. Position the rear panel of the silencing baffle on the rear panel of
the inverter.
3. Screw two cylindrical screws with contact washers into the middle
threads on the rear panel (torque: 8Nm).
Mounting the cover of the silencing baffle
Required mounting material:
☐ 1 cylindrical screw
☐ 3 contact washers
☐ 9 pan head flange screws
☐ 13 washers
☐ 10 hexagon nuts
Procedure:
1. Align the lid on the rear panel. Place the cover over the stud bolts.