SMA SUNNY CENTRAL CP XT Series - Page 21

6 Mounting
SMA Solar Technology AG
Installation Manual 21SCCPXT-SCS_NR-IA-en-12
2. Insert a cylindrical screw with contact washer into the top left
thread. Do not tighten the screw yet.
3. Screw five pan head flange screws into the upper threads on the
cover. Do not tighten the screws yet.
4. Fasten the ventilation plate of the rear panel of the silencing baffle
to the cover. Do not yet tighten the four pan head flange screws
yet.
5. Screw two hexagon nuts with contact washers onto the bottom
right and left stud bolts on the rear panel.
6. Screw all hexagon nuts and washers onto the remaining stud
bolts of the rear panel.
7. Align the cover and tighten all screws and nuts (torque: 8Nm).