SMA SUNNY CENTRAL CP XT Series - Page 22

6 Mounting
SMA Solar Technology AG
Installation ManualSCCPXT-SCS_NR-IA-en-1222
Mounting the Rain Shield
Required mounting material:
☐ 2 cylindrical screws
☐ 2 contact washers
☐ 6 pan head flange screws
Procedure:
1. Position the rain shield on the silencing baffle.
2. Screw two cylindrical screws with contact washers into the bottom
right and left threads on the cover and tighten them (torque:
8Nm).
3. Screw six pan head flange screws into the threads and tighten
them (torque: 8Nm).