Ockpvgpcpeg"Rtqegfwtgu"
"
7033"
SPARE PARTS LIST
PARTS DESCRIPTION POSITION CÓDE
CATEGORY
(NOTE 4)
PNEUMATIC BLOCK SET
. Base & Block O-ring (NOTE 2)
. Syntherized Bushing
. Analog indicator (Gage - Stainless Steel and Brass) (NOTE 5)
. Filtering Element
. Spool valve
. Spool valve Spring
. Stainless steel Filter- 1/4" NPT - includes filtering element
. Vent Plug - Stainless Steel
19,23,25,28,29,30,31 and
32
19
23
25
28
29
40
30
32
400-1317 (NOTE 6)
400-0085
400-0033
400-1120
400-0655
400-0653
400-0787
400-1383
400-0654
A
-
-
-
-
A
-
-
-
HALL COVER SET
. Hall Cover Bolt
. Hall Support + Hall Sensor + Flat cable
REMOTE EXTENSION SET
CABLE SET + CONNECTOR
33 (or 36), 34 and 35
34
35
38
37
400-1319 (NOTE 6)
400-0092
400-0090
400-1322 (NOTE 6)
400-1325 (NOTE 6)
-
-
-
-
-
1/2" NPT (Ex d) INTERNAL SOCKET SET PLUG IN BICHROMATIZED
CARBON STEEL
1/2" NPT (Ex d) INTERNAL SOCKET SET PLUG IN 304 SST
1/2" NPT INTERNAL SOCKET SET PLUG IN BICHROMATIZED CARBON
STEEL
1/2" NPT INTERNAL SOCKET SET PLUG IN 304 SST
M20 X 1.5 (Ex d) EXTERNAL SOCKET SET PLUG IN 316 SST
PG13.5 (Ex d) EXTERNAL SOCKET SET PLUG IN 316 SST
3/4" NPT (Ex d) ADAPTER IN 316 SST
39
39
39
39
39
39
39
400-0808
400-0809
400-0583-11
400-0583-12
400-0810
400-0811
400-0812
-
-
-
-
-
-
-
TRANSDUCER SET
NOTE 3
400-1316 (NOTE 6)
A
MAGNETS
. Linear magnet 30mm
. Linear magnet 50mm
. Linear magnet 100mm
. Rotary magnet
-
-
-
-
400-0748
400-0035
400-0036
400-0037
-
-
-
-
MOUNTING BRACKET SCREW FOR POSITIONER ASSEMBLY (packaged
with 12 units)
- 400-1190 -
Note
1) Includes terminal isolator, bolts (cover locking, ground and terminal isolator) and identification plate without certification.
2) O-rings are packaged with 12 units.
3) Includes all transducer’s spare parts.
4) For category A it is recommended to keep in stock 25 parts installed for each set and 50 for category B.
5) The pressure gauges for supply pressure, output 1 or output 2, will be supplied with the wet parts in brass.
6) For code detailed, use the tables below.
7) Use only with K2 Positioner version.