SMAR FY301 - Performance and Physical Specifications

FY301 – Operation, Maintenance and Instructions Manual
6.2
Performance Specifications
Resolution
≤ 0.1% F.S.
Repeatability
≤ 0.1% F.S.
Hysteresis
≤ 0.1% F.S.
Consumption
0.35 Nm
3
/h (0.20 SCFM) at 1.4 bar (20 psi) supply.
1.10 Nm
3
/h (1.65 SCFM) at 5.6 bar (80 psi) supply.
Output Capacity
13.6 Nm
3
/h (8 SCFM) at 5.6 bar (80 psi) supply.
Ambient Temperature Effect
0.8%/20°C of span
Supply Pressure Effect
Negligible
Vibration Effect
±0.3%/g of span during the following conditions:
• 5 - 15 Hz at 4 mm constant displacement.
• 15 - 150 Hz at 2g.
• 150 - 2000 HZ at 1g.
Reference SAMA PMC 31.1 - 1980, Sec. 5.3, Condition 3, Steady State.
Electro-Magnetic Interference Effect
Designed to comply with IEC 801 and European Standards EN50081 and EN50082.
Physical Specifications
Electrical Connection
½ - 14 NPT, Pg 13.5 or M20 x 1.5.
Pneumatic Connections
Supply and output: ¼ - 18 NPT
Gage: 1/8 - 27 NPT
Material of Construction
Injected low copper aluminum with polyester painting or 316 Stainless Steel housing, with Buna-N
O-rings on covers (NEMA 4X, IP66).
Weight
Without display and mounting bracket: 2.7 kg. (Aluminum)
5.8 kg. (Stainless Steel)
Add for digital display: 0.1 kg.
Remote Sensor: 550 g.
Cable: 100 g. (For connectors plus 45 g/m)