Smart Balancing PFM Flex 1 User Manual

13
Preparations – Measuring, cont’d
3.2.3 Media Flowfactor.
Media and associated correction factors
are specific to manufacturer data, at the
present water is set by default.
When available, tap the arrow to the right,
and choose the media from the drop-
down box. The “General” notification
include water and some standard media
and concentrations. Which can be used
to calculate and graphical present Power
capacity and energy amount for
respective media and flow.
The Flowfactor correction concerns
particular valve manufacturers.
Media menu also include two different
temperature presentations.
T
1
SBI temperature probe (SBIT)
T
2
SBI temperature probe (SBIT)
With the SBIT probe, the flow system
temperature can be measured at two
different measuring points
simultaneously.
The Sensor is prepared for the T1 and T2
and the connectors are placed at the left
side of the sensor. The DT can be set
manually to for instance 1 degree C.
Which enables Power and Energy
presentations without any actual
temperature measurement.

Smart Balancing PFM Flex 1 Specifications

General

Brand	Smart Balancing
Model	PFM Flex 1
Category	Measuring Instruments
Language	English