9
Preparations – Measuring, cont’d
Tap ”Start” or the MS symbol at the upper left to
scroll down the program list. In the list, you will
find ”BalanceFlex”. Tap ”BalanceFlex” in order to
start the BalanceFlex measuring program. (For
info regarding other programs and functions,
please see the enclosed HP Manual).
When starting the BalanceFlex program, the
program browser automatically starts to search for
objects (Measuring Sensors) with Bluetooth
transmission. Please also see ”Browser”, 3.2.1.2,
page 10.
The main menu of the BalanceFlex measuring
program is now displayed. Se picture to the right.
After a few seconds, short and rising tones are
heard. These tone signals inform that contact is
established between the Sensor and the Hand
Terminal via the Bluetooth function. The contact is
also confirmed when the battery indicator turns
green in accordance with the Sensor’s battery
status, as well as the serial number of the Sensor
is displayed above the battery indicator. (If battery
level is low, the Sensor should be charged; see
Technical data, Power supply, Sensor). The serial
number of the Sensor is also presented on a label
at the back side of the Sensor.
Before choosing Measuring Method (represented
by ”1” resp ”2” below ”Measuring Method”),
Settings,(for example units) could be performed.
To Next Page
Loading...
Need help?
General