Smart Dedicated Design STR7202 - Page 20

Installation Manual STR7202 TAG4 & SFM7704 TAG1
DBCI-0512-0052-V013
STR7202 2-Side Trimmer & SFM7704 Square Fold Module
Name: RI01
Date: 29-3-2017
Page: 20 / 72
4. Preparation (continued)
Contents
4.4 Preparing the STR (continued)
4.4.3 Connection Kit (D1 only) (continued)
Fig. 4.4.3.5 Fig. 4.4.3.6
Fig. 4.4.3.7 Fig. 4.4.3.8
Step
Action
Remarks
10.
Mount Inside Connection Plate.
At the Infeed Side open Waste Bin and mount Inside
Connection Plate [B] by placing Bolt [D] with washer [E]
through Connection Plate [B] (Fig. 4.4.3.5 & 4.4.1.6).
11.
Mount Outside Connection
Plate.
At the Outfeed Side mount Connection Plate [C] by
placing it with washers [E] on Bolts [D] (Fig. 4.4.3.7 &
4.4.1.8).
Inside - left
Inside - right
B
E
D
Outside - left
Outside - right
E
C
D