Smart Dedicated Design STR7202 - Page 35

Installation Manual STR7202 TAG4 & SFM7704 TAG1
DBCI-0512-0052-V013
STR7202 2-Side Trimmer & SFM7704 Square Fold Module
Name: RI01
Date: 29-3-2017
Page: 35 / 72
5. Installation (continued)
Contents
5.1 Mechanical Installation (continued)
5.1.3. SFM behind STR (continued)
Fig. 5.1.3.9 Fig. 5.1.3.10
Step
Action
Remarks
4.
Check height SFM.
The top cover of the SFM is at the same height as the STR
and both units are level (Fig. 5.1.3.9)
5. Setting the SFM parallel to
the STR.
Make sure that the SFM is parallel to the STR. If necessary,
adjust the SFM by turning nuts (C) on the outfeed side wheels
of the SFM (Fig. 5.1.3.9 & 5.1.3.10).
6.
Tighten Upper Nuts
When the height of the SFM is correct, tighten the Upper Nuts
[E] (Fig. 5.1.3.10).
E
C