SMART fortwo - Steering wheel

Illustration of variant 2
Variant 1:
X
Slide the right-hand front seat to its
rearmost position.
X
Turn handwheel : forward until the
desired seat backrest position is ach-
ieved
Variant 2:
X
Slide the right-hand front seat to its
rearmost position.
X
Hold onto the backrest at the head
restraint with one hand.
X
Pull release lever :.
The backrest is released.
X
Fold the backrest forwards.
Folding back
G
WARNING
If the seat backrest is not engaged, it may
fold forwards,
e.g. during braking or in the
event of an accident.
R
As a result, a backrest which is not
engaged would press you into the seat
belt. The seat belt cannot perform its
intended protective function and could
additionally cause injury.
R
The backrest cannot restrain objects or
loads in the boot.
This poses an increased risk of injury.
Before every journey, make sure that the
backrest is engaged as described.
Variant 1:
X
Turn handwheel :
back
until the desired
seat backrest position is achieved
Variant 2:
X
Pull release lever :.
The backrest is released.
X
Fold the backrest backwards.
X
Ensure that the seat backrest is engaged
again.
Switching the seat heating on/off
Switching on/off
G
WARNING
If you repeatedly switch on seat heating,
the seat cushion and backrest padding may
become very hot. The health of vehicle
occupants with
limited temperature sensi-
tivity or a limited ability to react to
excessively high temperatures may be
affected or they may even suffer burn-like
injuries. There is a risk of injury.
Therefore, do not switch on the seat heating
repeatedly.
X
Turn the key to position 2 in
the ignition
lock (Y page 115).
X
To switch on: press button ;.
Indicator lamp : in the button lights
up.
X
To switch off: press button ;.
Indicator
lamp :
in the button goes out.
Seats
81
>> Seats, steering wheel and mirrors.
Z