EasyManua.ls Logo

SmarTap e-Valve - Page 46

SmarTap e-Valve
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44 of 51
Backup Battery Maintenance
The system includes a backup battery that ensures that the water will
not flow through the system, even if the main power supply fails. Once
in a while, depending on frequency of the power failures, this battery
must be replaced.
Backup battery replacement indication
When the battery charge level drops below a certain level, the system
will notify user when the e-Valve is turned off: the dials will illuminate
with a yellow light and the flow dial will blink in an alternating pattern.
This indicates that the battery must be immediately replaced. However,
the e-Valve will still work normally.
When the battery charge level reaches a critical level, the dials will
illuminate with a red light, the flow dial will blink in an alternating pattern
and the system will not allow the water to flow. This indicates that the
battery must be immediately replaced to continue using the e-Valve.
Choosing the right replacement battery
We recommend you use 9V Lithium (non-rechargeable) batteries,
model EVE CR9V-P by EVE. Other non-rechargeable 9V Lithium
options include:
Manufacturer
P/N
GP
GPCR-V9
Energizer
LA522
Duracell
DL1604
Ultralife
U9VL-J-P
WARNING
NEVER USE RECHARGABLE BATTERIES WITH
THIS PRODUCT.
NEVER USE ALKALINE OR CARBON ZINC
BATTERIES WITH THIS PRODUCT.