43 of 51
Maintenace
The system is designed to perform self-checks during normal
operation. If a malfunction occurs or if maintenance is required, the
user will be notified by dedicated colors and blinking patterns on the
Two Dial and the One Dial controllers. If there is a notification that is
not covered in this manual, please contact SmarTap for further
assistance.
E-VALVE IS EQUIPPED WITH INTERNAL STOP-
VALVES. USE A FLAT SCREWDRIVER TO CLOSE OR
OPEN THE STOP VALVES. THE INTERNAL STOP
VALVES ARE IN OPEN POSITION BY DEFAULT.
CLOSE THE STOP VALVES WHEN WETTED
MODULES MAINTENANCE IS NEEDED.
To Next Page
Loading...