65
5.4
Infrared controls
Setting up an infrared remote
The Servus Environment Control grid sets are ready for variety of
devices and appliances. You will need to teach your Grid Pad the
correct infrared codes.
Using Infrared remote files
We keep a list of different IR remote codes for many home
entertainment devices. Before you start setting up your
devices, check the list to see if we have the relevant codes pre-
programmed to save you time. These files are stored as .remote
files. To find our current list of remotes visit:
thinksmartbox.com/ir-remotes
Installing a remote file
To install a .remote file, download the file you need from our
website, close down Grid 3 and open your File Explorer.
Navigate to: Users\Public\Documents\Smartbox\Grid 3\
Environment Control Accessories
Copy the .remote file into this folder and open Grid 3.
In Grid 3 Go to Settings – Environment control and you will now
see the new device listed.
To Next Page
Loading...
