Smartgen HGM1780 User Manual

HGM1780 Automatic Genset Controller
ISSUE 2013-04-03
Version1.7
Page 11 of 24
HGM1780 Automatic Genset Controller
 When in stop mode, the module will only react to emergency stop signal.
Note: Configurable output ports can be set as one of the following functions: “ETS
output”, “Idle output” or “Preheat output” via PC. Therefore, all three functions can
not be active at the same time; the above-mentioned is only to describe the logical
course of action of the controller in case all three functions are active.

Smartgen HGM1780 Specifications

General

Brand	Smartgen
Model	HGM1780
Category	Controller
Language	English