Need help?Do you have a question about the Smartgen HGMS61 and is the answer not in the manual?
General| Model | HGMS61 |
|---|---|
| Communication Ports | RS485 |
| AC Frequency | 50/60Hz |
| Display | LCD |
| Operating Temperature | (-25~+70)℃ |
| Storage Temperature | (-40~+85)℃ |
| Rated Current | 5A |
Describes the function of each key on the controller panel, including Start/Stop, Manual/Auto modes.
Explains the sequences for automatic starting and stopping, including delays and preheating.
Details how to manually start and stop the genset using the controller buttons.
Describes the procedure for forcing the genset to start in emergency situations.
Lists warning alarms that alert the user but do not stop the genset, with their descriptions.
Details shutdown alarms that cause the genset to stop, with their causes and LCD display.
Illustrates the HGMS61M controller panel and its terminal connections.
Shows the rear panel of the HGMS61D controller and its terminal connections.
Defines the functions and settings for programmable outputs 1 through 4.
Defines the functions and settings for programmable inputs 1 through 4.
Allows selection of temperature, pressure, and fuel level sensors and their types.
Specifies conditions for disconnecting the starter motor and engine disconnect.
Displays controller info like software version and allows language selection.
Instructions for mounting the HGMS61D module and its dimensions.
Details connector pin assignments for Cummins ISB/ISBE engines.
Explains using RS485-MODBUS for Cummins GCS engine information.
To Next Page
