Smartgen HGMS61

HGMS61 Genset Controller User Manual Page 11 of 47
4.2 CONTROLLER PANEL
Fig.1 - HGMS61D Front Panel Indication
Table 6– Alarm Indicators
Alarm Type
Alarm Indicator
Warning
Slow flashing (1time per second)
Shutdown
Fast flashing (5 times per second)
Note:
Status indicator: won’t illuminate when genset is in standby mode; flashes 1 time per second in start or
stop process and always illuminates when runs normally; for J1939 engines, press start key in auto
mode or stop mode, ECU power will output and status indicator always illuminates.