Smartgen HGMS61

HGMS61 Genset Controller User Manual Page 10 of 47
4 OPERATION
4.1 KEYS DESCRIPTION
Table 5 – Keys Description
Icon
Key
Description
Stop/ Reset
Can stop the genset under Manual/Auto mode;
Can reset alarm under Stop Mode;
Press this key more than 3 seconds to test panel indicators are OK or
not (lamp test);
During shutdown process, press this key again can stop generator
immediately.
Start
Start genset under Manual mode.
Manual
Press this key to set the module as Manual mode.
Auto
Press this key to set the module as Auto mode.
Close
Can control gens to switch on in Manual mode.
Open
Can control gens to switch off in Manual mode.
Set/ Confirm
Press this key to enter menu interface;
Shift cursor to confirm in parameters setting menu.
Up/Increase
Screen scroll;
Up cursor or increase value in setting menu.
Down/Decrease
Scroll screen;
Down cursor or decrease value in setting menu.
Home/Return
Return to homepage when pressing this key in main interface;
Return to the previous interface when pressing this key in parameters
setting interface.