Smartgen HGM1780 User Manual

HGM1780 Automatic Genset Controller
ISSUE 2013-04-03
Version1.7
Page 21 of 24
HGM1780 Automatic Genset Controller
﹡Remark 1: Pressing button during parameter setting will immediately exit the
set parameter.
﹡Remark 2: If the generator is in manual mode and crank disconnect condition is set
as 2 (magnetic pickup + generator frequency) or 5 (generator frequency +
magnetic pickup + oil pressure) and generator frequency and speed are NOT
equal to zero, pressing and holding and for 0.5 seconds will lead to the
controller automatically adjusting the flywheel teeth number according to
generator frequency and generator poles number.

Smartgen HGM1780 Specifications

General

Brand	Smartgen
Model	HGM1780
Category	Controller
Language	English