Version
Modify typical application.
Change input port 3 and 4 to multiplex input port, that is
to say, the input port 3 and input port 4 can be used as
auxiliary input port or analog input port.
Change “External Shutdown” input to “Emergency
Shutdown” input.
Some functions are added.
Modify the description of output raise/drop speed.
This manual is suitable for HGM400 series controller only.
Clarification of notation used within this publication.
Highlights an essential element of a procedure to ensure
correctness.
Indicates a procedure or practice, which, if not strictly observed,
could result in damage or destruction of equipment.
Indicates a procedure or practice, which could result in injury to
personnel or loss of life if not followed correctly.
To Next Page
Loading...
