Hydro:Evolved Start-Up Guide
Jul 14, 2022 ©2022 Smartrise Engineering, Inc. All Rights Reserved Page 13
b. If leveling time is too long or short, follow instructions for Adjust Leveling Time
and repeat step 1 - 4.
7.1 Car Overshooting
Overshooting is where the car goes beyond floor level. To prevent overshooting, increase the
time. This causes the car to slow down sooner which increases the slowdown distance.
The following procedure describes how to resolve car steady state if overshooting occurs:
Navigate to Adjustments and adjust the up or down distance by increasing the time.
Increasing the time causes the car to slow down sooner which increases the slowdown
distance.
Scroll back to GENERATE THRESHOLDS AND DISTANCES and select YES. If YES is not
selected, new thresholds and slowdowns are not generated.