Hydro:Evolved Start-Up Guide
Page 14 ©2022 Smartrise Engineering, Inc. All Rights Reserved Jul 14, 2022
7.2 Adjust Leveling Time
When weight is added to the car, it might take longer than normal (three to five seconds) for
the car to level. Decreasing the slowdown distance decreases the time it takes for the car to
level. The speed threshold to adjust is dependent upon the speed the car is traveling.
The following procedure describes how to resolve car steady state if leveling is longer:
Navigate to Adjustments and adjust the up or down distance by decreasing the time.
Decreasing the time causes the car to have a shorter slow down period which decreases
the slowdown distance.
Scroll back to GENERATE THRESHOLDS AND DISTANCES and select YES. If YES is not
selected, new thresholds and slowdowns are not generated.
To Next Page
Loading...
Need help?
General
