Smartro SC31B - Alarm Function Setting; Activate;Deactivate the Alarm Function; Manual Setting of the Alarm

9
8.2 Manual Setting of the Alarm
●
Long press "MEM" button, the hour display of Alarm 1 will be
ashing. Press "+" or "-" button to set the hour and press "MEM"
button to conrm the setting.
●
The minute display of the Alarm 1 will be ashing. Press "+" or
"-" button to set the minute and press "MEM" button to conrm the
setting.
●
The hour display of the Alarm 2 will be flashing. Press "+" or
"-" button to set the hour and press "MEM" button to conrm the
setting.
●
The minute display of the Alarm 2 will be ashing. Press "+" or "-"
button to set the minute. Press "MEM" button to conrm the setting
and end the manual setting procedure.
Please take note of the following:
The clock will automatically switch from setting mode to normal
mode if no button is pressed within 20 seconds.
8. Alarm Function Setting
8.1 Activate/Deactivate the Alarm Function
●
When the switch of alarm 1 or alarm 2 is moved to the "ON"
position, the symbol of " " or " " appears on the LCD display.
The alarm function will be activated.
●
When the switch of alarm 1 or alarm 2 is moved to the "OFF"
position, the symbol of " " or " " disappears. The alarm function
will be deactivated.