SmartUpTV smartupbox - SmartupTV Remote Code Copying; Copying All Codes Between Remotes

7.2.2 Learning all codes from another SmartupTV remote
Also there is a possibility to learn all codes from one SmartupTV remote to another.
A: Press on both remotes.
B: Notice that both remotes should be on the same brandcode.
C: Put both remotes in front of each other and start with the Remote, which has the
learned codes. Press and simultaneously until the LED lights up.
D: Now press and hold and simultaneously on the other remote. The
LEDs on both remotes should be flashing all the time. (CAUTION: Don't move the
remotes before the process has finished)
E: Once it has finished, the LED on the second remote should turns off.
F: To exit the mode of the remote, from which you have learned the codes, press .