14
FILTERS
SYSTEM FILTERS
An information page displaying
the usage of your 2 x G3 and 1 x F7
fi lters in terms of weeks remaining
before they require either cleaning
or replacing.
To access SYSTEM FILTERS press the
Filters tab on the SYSTEM Menu page:
?
FILTERS
F7 Filter 51 weeks
G3 Filter 18 weeks
Time Remaining
The readings above show how long your filters have
before they require maintenance. To reset either filter,
press the Reset button at the top of the screen.
?
FILTERS
F7 Filter 51 weeks
G3 Filter 18 weeks
Time Remaining
The readings above show how long your filters have
before they require maintenance. To reset either filter,
press the Reset button at the top of the screen.
FILTER RESET
Reset
Reset
F7 Filter FULL
When FULL, please refer to your User Manual for
cleaning/replacement instructions. Press ‘Reset’ after
maintenance is complete.
G3 Filter 18 wks
f F7 Filter: The F7 fi lter replacement
time is 52 weeks (1 year). Refer to
page 38 for replacement instructions.
f G3 Filters: The G3 fi lters are both
located in the Heat Exchanger which
should be cleaned every 26 weeks (6
months) and replaced approximately
every 2 to 3 years. Refer to page 40
for maintenance instructions.
To Reset your Filters
The Filter Resets are to be used when
you have cleaned or replaced your
fi lters and wish to reset the fi lters
back to empty/new. This will reset the
replacement time back to the start. Refer
to page 40 for further information on
replacing and cleaning your fi lters.
Note:
DO NOT reset the fi lter before the fi lters have
been cleaned or replaced as this will void your
warranty.
Press the RESET button at the top of
the page:
The FILTERS page will appear:
Press the ‘Reset’ tab adjacent to the
Filter(s) you wish to Reset:
A CONFIRM page will appear asking you
to confi rm your decision:
To Next Page
Loading...
Need help?
General