22
COMFORT LEVEL SETTING
Comfort Level sets the target
warmth of the home. The system will
automatically adjust to get as close
to this target as possible. The middle
(default) setting is the mid-point of
industry recommendations for a
healthy environment.
The CLIMATE page is displayed:
Press the COMFORT LEVEL tab to
change the settings
The mid-range Comfort Level is
highlighted. To choose a Warmer or
Cooler Comfort Level use the UP and
DOWN arrows to increase/decrease the
setting as desired.
Once the setting has been entered,
Press the Home button to return
to the Home Page or
Press the Back button to step
back to the SETTINGS Menu.
If any changes have been made to the
settings in this section, Synergy will
prompt you to confi rm your decision.
Refer to page 20 for further instructions
f To set the desired COMFORT
LEVEL press SETTINGS on
the Home page and then the
CLIMATE TAB.
To Next Page
Loading...
Need help?
General