39
f Use the red arrows to adjust the Hour
and minutes
f Use the blue arrows to adjust the Day
and Month
f Use the black arrows to adjust the Year
CLOCK
SETTINGS - CLOCK
The CLOCK needs to be set before
your system can correctly operate
the timers for the tempering heater
or Heat Boost features (if installed).
The CLOCK page will display showing
the current hour, minute and day
settings.
Note:
Once the Clock is set, the current date and time
will be displayed in the top right hand corner of
the HOME PAGE.
To set the Clock, press SETTINGS on the
Home page then press Clock:
Note:
In the event of a power cut, an internal battery
will maintain the proper CLOCK operation.
Once the setting has been entered,
Press the Home button to return
to the Home Page or
Press the Back button to step
back to the SETTINGS Menu.
If any changes have been made to the
settings in this section, Synergy will
prompt you to confi rm your decision.
Refer to page 20 for further instructions
To Next Page
Loading...
Need help?
General