If tilt mode isn't activated promptly, the motor programming will time out. To reinitiate, follow
the steps again, ensuring you press the STOP button within 4 seconds after the motor jogs.
NOTE: To return to Running Mode, simply follow the procedure outlined above.
Every battery motor from SmartWings arrives preprogrammed.
This includes the remote synced with the motor, preset upper and lower operational limits.
After the motor jogs, press the STOP button.
The motor will jog once, indicating it has
entered Tilt Mode.
With the remote unlocked, hold UP and
DOWN button on the remote for around
5 seconds, the motor will jog once.
To switch between tilt mode (moves an inch with each press) and running mode (moves
continuously), ensure the shade limits are set and then follow these steps:
19
Tilt Mode
To Next Page
Loading...
Need help?
General
