If you don't pair the remote within the timeframe, the motor's pairing sequence
will expire. In such cases, redo the previous steps, ensuring you press and hold
the STOP button within 10 seconds after the motor jog.
To operate multiple motors simultaneously without switching channels, you can set up
grouped channels. Ensure each motor is individually paired with its own channel on the
remote before proceeding with grouping. This facilitates the synchronized operation of
selected motors.
Every battery motor from SmartWings arrives preprogrammed.
If you have multiple motors paired with a 15-channel remote, remember the '0' channel is
set to control all motors simultaneously by default.
To set specific motors for group control on a designated channel, follow these steps:
10 secs of
（2 secs）
（2 secs）
Within 10 secs Press
2 SECS
7
Group Control
To Next Page
Loading...
Need help?
General
