Move the middle railand and
bottom rail to the favorite position
To set a preferred position for your shade motor, move to the desired spot and press the
STOP button to halt its movement.
Press and hold STOP button for 2 seconds, the shade will stop at favorite position.
Every battery motor from SmartWings arrives preprogrammed.
This includes the remote synced with the motor, preset upper and lower operational limits and
an unlocked remote.
To set a favorite position, follow these steps. The favorite position allows you to designate a
custom stopping point between the upper and lower limits. Note: Each shade motor supports
one favorite position.
4
Favorite Positions
To Next Page