SMC Networks 2552W-G2 - Page 109

Radio Interface
5-63
5
CLI Commands for WMM – Enter interface wireless mode and type wmm required
for clients that want to associate with the access point. The
wmm-acknowledge-policy command is used to enable or disable a policy for each
access category. The wmmparms command defines detailed WMM parameters.
Enterprise AP(if-wireless g)#wmm required
6-130
Enterprise AP(if-wireless g)#wmm-acknowledge-policy 0 noack
6-130
Enterprise AP(if-wireless g)#wmmparams ap 0 4 6 3 1 1
6-131