SMC Networks 2552W-G2 - Show Interface Wireless

Wireless Interface Commands
6-107
6
show interface wireless
This command displays the status for the wireless interface.
Syntax
show interface wireless <g> vap-id
• g - 802.11g radio interface.
• vap-id - The number that identifies the VAP interface. (Options: 0~7)
Command Mode
Exec
Example
Enterprise AP#show interface wireless g 0
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description : Enterprise 802.11g Access Point
SSID : VAP_TEST_11G 0
Turbo Mode : OFF
Channel : 1 (AUTO)
Status : Disable
----------------802.11 Parameters--------------------------
Transmit Power : FULL (13 dBm)
Max Station Data Rate : 54Mbps
Multicast Data Rate : 5.5Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
Authentication Timeout Interval : 60 Mins
Association Timeout Interval : 30 Mins
DTIM Interval : 1 beacon
Preamble Length : LONG
Maximum Association : 64 stations
VLAN ID : 1
----------------Security------------------------------------
Closed System : DISABLED
Multicast cipher : WEP
WPA clients : WEP-ONLY
WPA Key Mgmt Mode : PRE SHARED KEY
WPA PSK Key Type : ALPHANUMERIC
Encryption : DISABLED
Default Transmit Key : 1
Common Static Keys : Key 1: EMPTY Key 2: EMPTY
Key 3: EMPTY Key 4: EMPTY
Authentication Type : OPEN
==========================================================
Enterprise AP#