EasyManua.ls Logo

SMC Networks 2552W-G2 - Advanced Configuration

SMC Networks 2552W-G2
294 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Configuration
5-2
5
Advanced Configuration
The Advanced Configuration pages include the following options.
Table 5-2. Menu
Menu Description Page
System Configures basic administrative and client access 5-3
Identification Specifies the host name 5-3
TCP / IP Settings Configures the IP address, subnet mask, gateway, and domain
name servers
5-5
RADIUS Configures the RADIUS server for wireless client authentication
and accounting
5-7
SSH Settings Configures Secure Shell management access 5-11
Authentication Configures 802.1X client authentication, with an option for MAC
address authentication
5-12
Filter Control Filters communications between wireless clients, access to the
management interface from wireless clients, and traffic matching
specific Ethernet protocol types
5-17
VLAN Enables VLAN support and sets the management VLAN ID 5-19
WDS Settings Configures bridge or repeater modes for each radio interface and
sets spanning tree parameters
5-21
AP Management Configures access to management interfaces 5-27
Administration Configures user name and password for management
access;
upgrades software from local file, FTP or TFTP server;
resets
configuration settings to factory defaults; and resets the access
point
5-28
System Log Controls logging of error messages; sets the system clock via
SNTP server or manual configuration
5-33
SNMP Configures SNMP settings 5-37
SNMP Controls access to this access point from management stations
using SNMP, as well as the hosts that will receive trap messages
5-37
SNMP Trap Filters Defines trap filters for SNMPv3 users 5-45
SNMP Targets Specifies SNMPv3 users that will receive trap messages 5-47
Radio Interface G Configures the IEEE 802.11g interface 5-49
Radio Settings Configures common radio signal parameters and other settings for
each VAP interface
5-49
Security Enables each VAP interface, sets the SSID, and configures
wireless security
5-66
Status Displays information about the access point and wireless clients 5-85
AP Status Displays configuration settings for the basic system and the
wireless interface
5-85

Table of Contents

Related product manuals