SMC Networks 6624FMSC - annexe 1 User Manual

3-7
Troubleshooting
Diagnosing with the LEDs
Troubleshooting

A module was
installed and the
switch has not
yet been reset.
When you install modules in the module slots, you must reset or reboot the switch so the
switch processor can properly initialize and configure the module. The flashing LED
informs you that the module is not initialized. The module will not work properly until the
switch is reset or rebooted.
Tip Problem Solution

SMC Networks 6624FMSC - annexe 1 Specifications

General

Brand	SMC Networks
Model	6624FMSC - annexe 1
Category	Switch
Language	English