T
ROUBLESHOOTING
A-3
Management Problems
Cannot connect using
the web browser
• Be sure to have configured the Barricade with a valid
IP address, subnet mask, and default gateway.
• Check that you have a valid network connection to the
Barricade and that the port you are using has not been
disabled.
• Check the network cabling between the management
station and the Barricade.
Forgot or lost the
password
• Press the Reset button on the front panel (holding it
down for at least five seconds) to restore the factory
defaults.
Troubleshooting Chart
Symptom Action
To Next Page
Loading...
