A
DVANCE D
S
ET UP
4-8
Advanced Setup
Use the web management interface to define system parameters, manage
and control the Barricade and its ports, or monitor network conditions.
The following table outlines the selections available from this program.
Menu Description
System Sets the local time zone, the password for
administrator access , and the IP address of a PC
that will be allowed to manage the Barricade
remotely.
WAN Specifies the Internet connection type: (1)
Dynamic IP, (2) PPPoE, (3) Static IP address, or (4)
Bridge.
LAN Sets the TCP/ IP configuration for the Barricade
LAN interface and DHCP clients.
NAT Shares a single ISP account with multiple users, sets
up virtual servers.
Firewall Configures a variety of security and specialized
functions, including, Access Control, Hacker
Prevention, and DMZ.
Tools Contains options to backup & restore the current
configuration, restore all configuration settings to
the factory defaults, update system firmware, or
reset the system.
Status Provides WAN connection type and status,
firmware and hardware version numbers, system IP
settings, as well as DHCP, NAT, Firewall info.
Displays the number of attached clients, the
firmware versions, the physical MAC address for
each media interface, and the hardware version and
serial number.
Shows the security
For information on UPnP and DDNS please visit
www.smc-europe.com or contact
the SMC support team.
and DHCP client log.
To Next Page
Loading...
