5-1
C
HAPTER
5
C
ONFIGURING
C
LIENT
TCP/IP
If you have not previously installed the TCP/IP protocols on your client
PCs, refer to the following section. If you need information on how to
configure a TCP/IP address on a PC, refer to “Setting Up TCP/IP to
Work with the Barricade” on page 5-5.
Installing TCP/IP
Windows 95/98/ME
1. Click “Start/Settings/Control Panel.”
2. Double-click the Network icon and select the “Configuration” tab in
the Network window.
3. Click the “Add” button.
4. Double-click “Protocol.”
To Next Page
Loading...
