I
NSTALLATION
2-3
Front Panel
Figure 2-1. Front Panel
LED Indicators
The Barricade includes LED indicators on the front panel that simplify
installation and network troubleshooting.
Check the power and port indicators as shown in the following table
.
LED Condition Status
Power On The Barricade is receiving power.
Flashing The SMC7004VBR is initializing or upgrading
firmware.
WAN On The WAN port has established a valid network
connection.
Flashing The WAN port is transmitting or receiving traffic.
Link/ACT On The indicated LAN port has established a valid
network connection.
Flashing The indicated LAN port is transmitting or
receiving traffic.
Speed On The indicated LAN port is operating at 100 Mbps.
Off The indicated LAN port is operating at 10 Mbps.
To Next Page
Loading...
