C
ONFIGURING
THE
B
AR RICADE
4-11
Remote Management
Allows a remote PC to configure, manage, and monitor the Barricade
using a standard web browser. Check “Enable” and enter the IP address of
the remote host. Click “Apply.”
Note: If you specify an IP address of 0.0.0.0, any host can manage the
Barricade.
In order to get access to your router enter the IP address of your router
and " : 8080 " (without " " ) in the address bar. Example: http://WAN_IP:8080
To Next Page
Loading...
