S
ETTING
U
P
TCP/IP
TO
W
ORK
WITH
THE
B
ARRICADE
5-34
Step 3. Obtain IP Settings From Your Barricade
Now that you have configured your computer to connect to your
Barricade, it needs to obtain new network settings. By releasing old IP
settings and renewing them with settings from the Barricade, you will also
verify that you have configured your computer correctly.
1. On the Windows
desktop, click “Start/
Programs/Command
Prompt.”
2. In the “Command
Prompt” window, type
“IPCONFIG /
RELEASE” and press
the <ENTER> key.
To Next Page
Loading...
