SMC Networks EX600-ED Series - Page 39

-39-
No. DOC1045423
L/A port1 or L/A port2
LED is NOT flickering.
RUN LED is NOT green ON.
Or red ERR LED is flashing.
Red PWR or PWR(V)
LED is ON.
Or PWR(V) LED is OFF
SI unit
Refer to Fault 8
The digital input or output
device does not work
correctly.
If the error is not eliminated even
after supplying power, contact
your SMC sales representative.
Refer to Fault 13
Refer to Fault 14
Refer to Fault 15
Refer to Fault 9
Refer to Fault 10
The valve does not
work correctly.
Refer to Fault 11
The analogue input or
output device does not
work correctly.
The IO-Link device does
not work correctly.
The ITV module does not
work correctly.
Refer to Fault 12
Refer to Fault 16
The temperature
measurement device does
not work correctly.