SMC Networks HRR012-A*-20 Series Operation Manual

HRX-OM-W004
Chapter 3 Serial communication
3.13 Register Map HRR Series
3-18
3.13 Register Map
Address
Bit Format
R/W
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0000h
Circulating fluid discharge temperature
-327.6 to 327.6℃ = F334h to 0CCCh(0.1℃/dig)
(Refer to 3.13.1 Circulating fluid discharge temperature)
R
0001h
Circulating fluid flow rate
-3276.8 to 3276.7LPM = 8000h to 7FFFh(0.1LPM/dig)
(Refer to 3.13.2
Circulating fluid flow rate)
0002h
Circulating fluid discharge pressure
-32.768 to 32.767MPa = 8000h to 7FFFh（0.0001MPa/dig）
(Refer to 3.13.3 Circulating fluid discharge pressure)
0003h
Electric conductivity of the circulating fluid
–3276.8 to 3276.7μS/cm = 8000 to 7FFFh (0.1μS/cm/dig)
(Refer to 3.13.4 Electric conductivity of the circulating fluid)
0004h Status flag 1 (Refer to 3.13.5 Status flag 1)
0005h Alarm flag 1 (Refer to 3.13.6 Alarm flag)
0006h Alarm flag 2 (Refer to 3.13.6 Alarm flag)
0007h None
0008h Data instruction information 2 ∗1 Data instruction information 1 ∗1
0009h
Data display 1(Refer to 3.13.8 Data display)
000Ah Data display 2(Refer to 3.13.8 Data display)
000Bh
Circulating fluid set temperature
-3276.8 to 3276.7℃ = 8000h to 7FFFh (0.1℃/dig)
(Refer to 3.13.9 Circulating fluid set temperature)
R/W
000Ch None ∗3
Reserv
ed
No
ne
∗2
000Dh None
000Eh None
000Fh Data instruction 2 ∗4 Data instruction1 ∗4
∗1 Data instruction information (Refer to 3.13.7 Data instruction information)
∗2 Operation Start Command (Refer to 3.13.10 Operation Start Command)
∗3 Serial remote instruction (Refer to 3.13.11 Serial remote instruction)
∗4
Data instruction (Refer to 3.13.12 Data instruction)

SMC Networks HRR012-A*-20 Series Specifications

General

Brand	SMC Networks
Model	HRR012-A*-20 Series
Category	Chiller
Language	English