8 Specification for Option C
8 - 1
8 Specification for Option C
When performing the installation and maintenance of the product, the following points must be
understood and followed.
8-1 Safety instructions
When handling the product, take care of the following precautions.
8-2 Precautions for the installation and handling of the product
1) The surface of cooper tube is painted with a special epoxy to improve the rust proof effect from
corrosive gas, but it is not perfect rust proof. Therefore, avoid installing the product in the place
exposed to corrosive gas as much as possible.
2) If any of the painted surfaces of copper tube is damaged, such as when the panels are removed
for maintenance, the effect of its rust proofing painting is lost. Do not give damage any painted
surfaces of copper tube.
8-3 Specifications
The surface of copper tube is painted with a special epoxy resin for the rust proofing. The parts
covered with aluminum fins and insulations are not painted.
Shut off the power supply when removing the panel for maintenance work, etc. The product
has a fan(s) and could cause serious danger to operators.
To Next Page
Loading...
Need help?
General