HEC-OM-S002
Chapter 5 Operation
5.1 Operation of Controller
5-11
5.1.10 Initial Value and Setting Range for Each Mode
Table 5-2 Initial value and setting range for each mode
Description
Mode
indicator
Setting range Initial value
Setting of target temp. - 0.00 to 60.00 25.00
Offset setting
-1.00 to 1.00
According to the
Inspection Record
Heating output indicator
－ －
Cooling output indicator
－ －
Key lock setting
0 to 3 0
Control mode setting
, ( ),( ,
,
, )
Heating Proportional Band Setting
0.1 to 200.0%
0.5
Integral Time Setting
0 to 3600
20
Derivative Time Setting
0 to 3600
0
Heating Proportional Cycle Setting
1 to 120
1.0
ARW setting
0.0 to 100.0
100.0
Cooling Proportional Band Setting
0.00 to 10.00
0.50
Cooling Proportional Cycle Setting
1 to 120
1.0
To Next Page
Loading...