SMC Networks ITV SEN DUX02357 Series

IN19856
- 18 - Rev 2
Figure 9 ITV in POE Mode
To change the POE state of an ITV, press “Submit”, or the keyboard Enter key. The ITV will turn on
POE and store this state. The ITV now has the “Bus Out” connection changed to the POE state
indicated by the “Enable POE” checkbox: enabled – 24 VDC on (checked) or disabled – 24 VDC off
(unchecked).
12.3. Connecting ITVs for a POE Group
The cable connections are critical for proper operation of POE. The following is an example of
proper POE cable connections.
Figure 10 - ITV POE Group Ethernet Connections
I
T
V
1
I
T
V
2
I
T
V
3
I
T
V
4
P
P
P
I
T
V
5
I
T
V
6
P
Ethernet
Ethernet from PLC
or previous device
24VDC
POE group 1
P