-19-
No.LFE****-OMZ0012
Non-flexible piping materials such as steel piping will be subject to excessive moment load, vibration and
impact from the piping side, so use a flexible tube for intermediate connection.
Misaligned piping may apply long-term load after piping, causing malfunction, damage, or water leakage.
If one-touch fitting is used, hold the fitting by hand so that the load for mounting and removing the tube will
not be applied to the product.
The IN side straight piping length shall be a minimum of 5 times (5D) the piping size to achieve a stable
measurement.
For details, refer to straight piping length and accuracy (page 27).
Avoid any sealing tape getting inside the piping.
Ensure that there is no leakage from loose piping.
To Next Page
Loading...
