SMC Networks LFE series - Wiring

-20-
No.LFE****-OMZ0012
■ Wiring
Connector
Attaching/detaching of the connector should be done while the power supply is turned off.
Power lines and high-voltage lines can cause noise. Keep the wiring away form them.
Otherwise, malfunction may result due to noise.
Ensure that the FG terminal is connected to ground when using a commercially available switch-mode
power supply.
If you have problems with the switch-mode power supply, consider using a noise filter.
No.
Pin description
1
DC(+)
2
OUT2
3
DC (-)
4
OUT1
*: When using the lead wire and M12 connector included with the LFE series.
Cable connector
Connector pin numbers
(female connector)
4
2
3
1
Connector on the body
Connector pin numbers
(male connector)
4
3
1
2
No.
Pin description
Wire color
1
DC (+)
Brown
2
OUT2
White
3
DC (-)
Blue
4
OUT1
Black