EasyManuals Logo

SMC Networks SMC Barricade g SMC2804WBR User Manual

SMC Networks SMC Barricade g SMC2804WBR
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
Troubleshooting
96
If you have an IP address that starts with 169.254.xxx.xxx then
see the next section.
If you have another IP address configured, then see section C.
B. I am getting an IP Address that starts with
169.254.xxx.xxx
If you are getting this IP Address, then you need to check that
you are properly connected to the Router.
Confirm that you have a good link light on the Router for the port
this computer is connected to. If not, please try another cable.
If you have a good link light, please open up a DOS window as
described in the previous section and type ipconfig/renew.
If you are still unable to get an IP Address from the Router,
reinstall your network adapter. Please refer to your adapter
manual for information on how to do this.
C. I have another IP Address displayed
If you have another IP address listed then the PC may not be
configured for a DHCP connection. Please refer to “Configuring
Client TCP/IP” on page 12 for information.
Once you have confirmed your computer is configured for DHCP,
then please follow the steps below.
1. Open a DOS window as described above.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks SMC Barricade g SMC2804WBR and is the answer not in the manual?

SMC Networks SMC Barricade g SMC2804WBR Specifications

General IconGeneral
BrandSMC Networks
ModelSMC Barricade g SMC2804WBR
CategoryWireless Router
LanguageEnglish

Related product manuals