Configuring the Wireless Barricade g Router
54
• General Parameters
• RADIUS Server Parameters
Field Default Parameter Description
Enable 802.1X Yes Starts using 802.1x security control.
Session Idle
Timeout
300 seconds Defines a maximum period of time for
which the connection is maintained
during inactivity.
Re-Authentication
Period
3600 seconds
Defines a maximum period of time for
which the RADIUS server will
dynamically re-assign a session key
to a connected client station.
Quiet Period 60 seconds Defines a maximum period of time for
which the Router will wait between
failed authentications.
Server Type RADIUS Selects the authentication server
type.
Field Defaults Description
Server IP 192.168.1.1 The IP address of the RADIUS server.
Server Port 1812 UDP port is used for RADIUS authentication
messages.
Secret Key none
Defines a text string on both the RADIUS
client and server to secure RADIUS traffic.
The RADIUS server requires MD5
Message-Authenticator attribute for all
access request messages. The 802.1x
authentication scheme is supported by using
the Extensible Authentication Protocol
(EAP) over the RADIUS server.
NAS-ID none Defines the request identifier of the Network
Access Server (NAS)
To Next Page
Loading...
Need help?
General
