Configuring the Wireless Barricade g Router
72
The section also has a “Server Configuration” section that
automatically opens the port options checked in the Virtual
Server section. Simply enter in the IP Address of your server,
such as a web server, and then click on the port option “HTTP
Port 80” so users can access your server from the WAN
connection (Internet).
UPnP
Enable UPnP by checking ON in the screen above. UPnP allows
the device to automatically:
• dynamically join a network
• obtain an IP address
• convey its capabilities and learn about the presence and
capabilities of other devices. (Default: OFF)
To Next Page
Loading...
Need help?
General
