EasyManuals Logo

SMC Networks SMC Barricade g SMC2804WBR User Manual

SMC Networks SMC Barricade g SMC2804WBR
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
ADVANCED SETUP
51
Four keys will be generated. Choose a key ID (1-4) from the
drop-down list or accept the default key.
If you use encryption, configure the same keys used for the
Router on each of your wireless clients. Note that Wired
Equivalent Privacy (WEP) protects data transmitted between
wireless nodes, but does not protect any transmissions over your
wired network or over the Internet.
WPA
Wi-Fi Protected Access (WPA) combines Temporal Key Integrity
Protocol (TKIP) and 802.1x mechanisms. It provides dynamic
key encryption and 802.1x authentication service. With TKIP,
WPA uses 48-bit initialization vectors, calculates an 8-byte
message integrity code, and generates an encryption key
periodically. For authentication, it allows you to use 802.1x
authentication for an environment with a RADIUS server installed
on your network. Selecting the Pre-shared Key enables WPA to
use the pre-shared key in a SOHO network.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks SMC Barricade g SMC2804WBR and is the answer not in the manual?

SMC Networks SMC Barricade g SMC2804WBR Specifications

General IconGeneral
BrandSMC Networks
ModelSMC Barricade g SMC2804WBR
CategoryWireless Router
LanguageEnglish

Related product manuals